Skip to content

Experiment 04 · Viva Questions · Updated

He–Ne LASER Beam Divergence

Pick an option to see whether it holds. If one of them stops you, the theory page is two steps back.

  1. 01

    For a He–Ne LASER, the typical value of divergence is:

    Show answer

    Answer: 10⁻³ radian

  2. 02

    LASER is an acronym for:

    Show answer

    Answer: Light Amplification by Stimulated Emission of Radiation

  3. 03

    In a He–Ne LASER, the ratio of He to Ne is of the order of:

    Show answer

    Answer: 10:1

  4. 04

    A LASER beam is:

    Show answer

    Answer: All of these

  5. 05

    LASER light is considered to be coherent because it consists of:

    Show answer

    Answer: Co-ordinated waves of exactly the same wavelength

  6. 06

    The coherence length of a conventional light source is typically of the order of:

    Show answer

    Answer: A few millimetres or centimetres

  7. 07

    The wavelength spread of highly monochromatic LASER light is of the order of:

    Show answer

    Answer: Less than 10 angstrom units

  8. 08

    Which pumping scheme is used in the He–Ne LASER?

    Show answer

    Answer: Four-level pumping scheme

  9. 09

    What is the pumping agent used in a He–Ne LASER, and its mode of operation?

    Show answer

    Answer: Electrical discharge, continuous wave (CW) mode

  10. 10

    In photo-radiation therapy for cancer treatment, patients are injected with a dye substance called:

    Show answer

    Answer: HpD

Step 1 of 3

Share feedback

A few questions, about three minutes. Nothing here asks for your name or email.

I am a:
Which PrayogShala module did you use? Pick all that apply
Select one or more

Graphics acceleration is off 3D simulations can’t run here yet Graphics acceleration is on

3D simulations run slower without it. Turning it on is recommended.

The simulations need WebGL 2, which isn’t available in this browser right now. Turning on hardware acceleration usually brings it back; if not, update the browser or the graphics driver.

3D simulations are running with hardware acceleration. Nothing to change.

On a college lab computer this setting may be locked. If so, ask the lab in-charge.